Felt, synthetic, hybrid, and self-adhered underlayments
Traditional asphalt-saturated felt is still recognized in some assemblies, but it is not what we rely on for Arizona tile and shingle work. Felt can absorb water, wrinkle, and tear more readily than modern sheets. GAF positions FeltBuster as an upgrade over conventional felts that can tear, degrade, or wrinkle in a way that shows through shingles.
Synthetic underlayments are typically polymer sheets. They are lighter than felt, do not absorb water the same way, and often have a published UV exposure window. They are usually mechanically attached, and some premium synthetics are tested for nail sealability. Hybrid underlayments combine traits of felt and synthetics. Self-adhered underlayments, sometimes called peel-and-stick, bond to the deck. Many use a modified asphalt adhesive and are tested to ASTM D1970, including sealability around nails. They are used in valleys, at eaves, around penetrations, or as a full-deck sheet under tile when a waterproofing underlayment is specified. In Arizona, published high-temperature ratings matter.
Underlayments we install under Arizona tile roofs
For tile, Real Roofing uses Westlake TileSeal, Veer VShield Ultra, Veer SuperTack, APOC Weather Armor CrossOver CX-L, and Polyglass Polystick MTS Plus. We match the sheet to the tile system and the manufacturer's approval list. Figures below come from the manufacturers' product pages and data sheets. If a figure is not published there, we leave it out.
Westlake Royal TileSeal HT (formerly associated with Boral TileSeal) is a self-adhered, high-temp SBS-modified asphalt membrane with a non-woven polyester surface, a nominal thickness of 64 mils, and a 3-foot by 72-foot roll. Westlake states that it self-seals around fasteners, is intended for foam-fastened roof tiles, and is UV resistant for up to six months. Florida product evaluation lists 180 days of weather exposure and a minimum application temperature of 40°F. Westlake publishes a 30-year limited warranty. The product page does not state a single maximum temperature, so we do not invent one.
Veer VShield Ultra is Veer's premium mechanically attached synthetic underlayment, described as a four-layer sheet made to ASTM D8257 and to the nail-sealable portion of ASTM D1970. Veer states that it is UV resistant for up to 180 days and carries a 30-year limited warranty. The Veer product pages we reviewed do not state a maximum service temperature, so that figure is omitted here.
Veer SuperTack is a high-temp self-adhered, synthetic-faced modified-SBS sheet that Veer lists for use under metal, tile, slate, shakes, and asphalt shingles. The manufacturer lists a 45-mil thickness, a temperature range of -40°F to 260°F, and UV resistance of up to 180 days. Warranty terms are not stated consistently across Veer's pages, so we do not quote a single SuperTack warranty length.
APOC Weather Armor CrossOver CX-L is the synthetic hybrid underlayment we install. APOC says it combines properties of organic felts and synthetics, and lists it for steep-slope coverings including shingles, wood shake, tile, metal, and slate. The data sheet lists a temperature range of -40°F to 240°F, exposure of up to 60 days, and does not recommend CX-L on slopes below 2:12. It includes a one-year standard warranty and points to registration for extended terms. APOC also publishes a limited lifetime manufacturer's warranty when CX-L is registered and installed to specification.
Polyglass Polystick MTS Plus is the Polyglass MTS underlayment we use. It is a self-adhered high-temperature sheet with ADESO dual-compound technology, rated up to 265°F and for a maximum of 180 days of UV exposure, at a nominal 60 mils. It is approved under tile, slate, and asphalt shingles. Polyglass's brochure notes that tile use is for mechanically attached tile only. Application is when the substrate is dry and project temperatures (air, roof deck, and membrane) are 40°F and rising. Qualifying installations can carry a 30-year material limited warranty, and Polyglass states that MTS Plus is eligible for a 50-year material limited warranty when installed beneath shingles.
| Product | Type | Temperature | UV or weather exposure | Typical tile use |
|---|---|---|---|---|
| Westlake Royal TileSeal HT | Self-adhered SBS | High-temp (no single max °F on the product page) | Up to 6 months | Foam-set and self-adhered tile assemblies |
| Veer VShield Ultra | Nailed synthetic, nail sealable | Not stated on Veer's product pages | Up to 180 days | Mechanically attached tile assemblies |
| Veer SuperTack | Self-adhered SBS | -40°F to 260°F | Up to 180 days | Self-adhered tile assemblies |
| APOC CrossOver CX-L | Hybrid, nail sealable | -40°F to 240°F | Up to 60 days | Mechanically attached steep-slope tile |
| Polyglass Polystick MTS Plus | Self-adhered high-temp | Up to 265°F | Up to 180 days | Mechanically attached tile only, per Polyglass |
A note on Polyglass Elastoflex: Elastoflex is Polyglass's SBS modified bitumen line for low-slope roofs, not a steep-slope tile underlayment. See our flat roof options guide and modified bitumen service page.
Underlayments we install under Arizona shingle roofs
For asphalt shingles, we also install GAF FeltBuster, GAF Tiger Paw, and GAF StormGuard. Real Roofing is a GAF Master Elite certified residential roofing contractor.
GAF FeltBuster is a synthetic roofing felt for asphaltic shingles. GAF states that it meets or exceeds ASTM D226 Type II, ASTM D8257, and ASTM D4869 Types III and IV, and resists UV degradation for up to 90 days. GAF is clear that FeltBuster is water resistant, not waterproof, and should not be used as a temporary roof. GAF Tiger Paw is GAF's premium roof deck protection, listed for asphaltic shingles and also noted for slate, wood, metal, or tile, with UV resistance for up to 180 days and the same temporary-roof caution. GAF states that Tiger Paw is eligible for up to a Lifetime Limited Warranty when installed with GAF Lifetime shingles and at least two additional qualifying GAF accessories.
GAF StormGuard is a film-surfaced, self-adhered leak barrier with a published thermal stability of 250°F and UV resistance of up to 90 days. GAF states that it self-seals around fasteners and helps protect eaves, rakes, valleys, and areas around chimneys and skylights. GAF describes the high-temperature compound as suitable for asphalt shingles and most metal roofing systems. StormGuard is eligible for a Lifetime Limited Warranty with GAF Lifetime shingles and at least two qualifying accessories, and for a 10-year limited warranty with approved non-asphaltic coverings.
On many Arizona shingle roofs, a practical layout is a synthetic or hybrid field sheet (FeltBuster, Tiger Paw, or APOC CX-L) with a self-adhered leak barrier such as StormGuard, SuperTack, or Polystick MTS Plus in valleys and at other details. The layout follows the shingle manufacturer's instructions and local code.
How we decide which product goes on which roof
Foam-set tile often calls for a self-adhered sheet the foam can bond to, which is why TileSeal HT is frequently the right Westlake choice. Mechanically attached tile can use a self-adhered high-temp sheet such as Polystick MTS Plus (in the applications Polyglass approves) or SuperTack, or a nailed nail-sealable sheet such as VShield Ultra or APOC CX-L. Shingle roofs typically use a GAF or hybrid field sheet, with self-adhered protection at eaves, valleys, and penetrations. On a GAF shingle system, GAF deck protection and a leak barrier may be required for the system warranty. We cover the underlayment within the manufacturer's published UV window.
If the tiles are still sound but the sheet has aged out, see tile underlayment replacement and tile lift and relay. For new work, start with asphalt shingles or tile roofing, use the Arizona roofing calculator, or request an inspection.
Frequently asked questions
1. Can I leave underlayment exposed through an Arizona summer?
Only within the UV or weather exposure period the manufacturer publishes, and never as a substitute for a finished roof. FeltBuster and StormGuard are rated up to 90 days, APOC CX-L up to 60 days, and TileSeal HT, VShield Ultra, SuperTack, Tiger Paw, and Polystick MTS Plus have longer published windows of up to 180 days or six months. We cover the sheet inside that window.
2. Is self-adhered underlayment always better than a nailed sheet?
Not always. Self-adhered sheets provide a bonded, nail-sealing layer and are often right in valleys, at eaves, and under tile when a waterproofing underlayment is specified. A quality nailed synthetic or hybrid, especially one tested for nail sealability such as VShield Ultra or APOC CX-L, is appropriate on many steep-slope roofs. The covering, the slope, and the manufacturer's approval list decide the system.
3. Why does my tile roof leak if the tiles still look fine?
On Arizona tile roofs, the underlayment is usually the waterproofing layer. Heat still ages that sheet. When it becomes brittle or torn, wind-driven monsoon rain can reach the deck even if few tiles are broken. That is a typical case for lift-and-relay or underlayment replacement rather than full tile replacement.
4. Do you still install asphalt felt?
We specify modern synthetic, hybrid, and self-adhered underlayments on the Arizona tile and shingle roofs in this guide. Felt remains a code-recognized product in some assemblies, but it is more prone to wrinkling, tearing, and moisture pickup.
5. How do warranties work on underlayment?
Each manufacturer publishes its own terms, and many require registration, approved coverings, and installation to current instructions. Some GAF accessories are eligible for system coverage with GAF Lifetime shingles and other qualifying accessories. Polyglass, Westlake, Veer, and APOC warranties vary by product and use. We will tell you what coverage applies to the system we propose. Real Roofing is licensed in Arizona, ROC 339597. Call (602) 910-2708 or use our contact page.



